How it works
Every piece is printed when you order it. There's no warehouse. There's one printer, one workbench and a queue with your name on it.

Who makes them?
SmartMiniForge makes 3D board game upgrades, one collection per game: sculpted tiles and minis in grey unpainted resin, printed to order in Creixell (Tarragona), Spain. Unofficial, fan-made.
Made by Oscar Pulido Castillo. SmartMiniForge is a small workshop: one resin printer, one workbench and one person who checks every piece before it leaves.
Our own workshop in Creixell (Tarragona), Spain. Online only, no physical shop. We ship to mainland Spain and the Balearics; not to the Canaries, Ceuta or Melilla for now.
How does a piece get from printer to table?
Print: every piece is printed in high-detail grey resin, in 50 µm layers, on an MSLA printer.
Wash and cure: it comes off the printer sticky, so it's washed in isopropyl alcohol, cured under UV light until it's hard and no longer tacky, and the print supports come off.
Check: every piece gets a look under raking light. Anything wrong is reprinted; nothing leaves half-done.
Pack: every piece wrapped on its own in bubble wrap, with a cardboard collar round the thin parts; gaps filled with kraft paper shred, in a tracked cardboard postal box with a care card and the legal sheet.
Below is your piece's route, in working days. The pictures are illustrations.
TodayYou place your order.
Day 1Your order joins this week's print run.
Days 2 to 6Printed in the run, in 50 µm layers.
Days 7 and 8Washed, UV cured, supports off.
Day 9Raking-light check.
Day 10It leaves the workshop, insured and tracked.
Whole collection · About 20 days: it ships all together.
Why in batches?
We work in batches: each week we print the orders the workshop can take. If a week fills up, we tell you before you pay and give you the real date. We never sell anything we can't deliver within 30 days.
Do they come painted?
Pieces arrive in grey resin, unpainted, and frankly rather handsome like that. Play with them as they are, or prime and paint them however you like.

How do I look after them and paint them?
To paint: prime with grey or black spray, let it dry, then start with a light drybrush. Ordinary miniature acrylics are fine.
Do
- Clean it with lukewarm water and a little soap.
Don't
- Dishwasher.
- Hours in the sun.
Pieces are small: keep them away from under-14s and from pets that chew everything.
Where does each design come from?
Each sculpt starts as an AI-assisted 3D draft. We rework it in Blender, add our own CAD plinth and fit, then resin-print and finish every piece to order in Spain.
Want to know when the next batch opens?
Leave your email and we'll write.