Skip to content

3D-printed board game tiles in resin

Sculpted 3D tiles in grey resin, unpainted, that sit on top of your game's cardboard tiles. Every base is measured in millimetres (60×66 or 72×70 mm), carries the icons in relief on the front and 2 Ø3×2 mm magnets for the minis. They're 41 to 70 mm tall, leave the workshop in ≤10 working days and start at €34.

Price incl. VAT; sizes in mm; grey resin, unpainted; made to order, ships in ≤10 working days; ships within Spain only (mainland + Balearics) for now, free; 14-day returns; game not included; unofficial, fan-made

We're not selling online yet. Leave your email and we'll tell you when the next batch opens.

All the tiles

From card to stone. Each tile takes the flat drawing from your game and raises it into relief: temples, bridges, crypts, trees. The icons stay on the front, 1.5 mm proud, so nobody has to stand up to read them. Here they all are, level 2 and level 1.

Product images are 3D renders. Painted ones show the relief; pieces ship in grey resin, unpainted.

Level 2, 72 × 70 mm base

Level 1, 60 × 66 mm base

Size of each tile

Size of each piece, in mm
PieceBase (mm)Height (mm)Price
Blue spike shrine60 × 6646€34
Crashed plane60 × 6642€34
Dragon claw gate60 × 6642€34
Moss golem throne60 × 6647€34
Owl mask tree60 × 6648€34
Red jaguar rocks60 × 6641€34
Serpent monolith60 × 6646€34
Skeleton crypt60 × 6646€34
Stalagmite bird gate60 × 6645€34
Tree-wrapped tower60 × 6645€34
Bridge of the two sentinels72 × 7066€44
Jungle bone temple72 × 7063€44
Owl face cliff72 × 7052€44
Ochre rock spire72 × 7058€44
Ruined cliff sanctum72 × 7053€44
Serpent cavern temple72 × 7070€44
Eagle canyon quarry60 × 6646€34
Fang skull pit60 × 6646€34
Root tree archive60 × 6643€34
Sea cliff lighthouse60 × 6650€34
White owl dwelling60 × 6649€34
Dino skull arena72 × 7056€44
Geyser spire caldera72 × 7059€44
Golden cave treasury72 × 7057€44

Buyer's guide

Resin or PLA

Resin prints in 50 µm layers: clean edges, cracked stone, leaves you can tell apart. PLA is fine for tokens and organisers; for fine relief people look at up close, it's resin. That's why a tile costs more than a filament token.

Sizes and fit

Every base is drawn in millimetres from the game's own tile, measured with a ruler. The level 2 base is 72×70 mm and the level 1 base 60×66 mm; they sit on the cardboard tile and leave its edge showing. What grows is the height, not the space it takes on the table.

Grey or painted

They arrive in grey resin, unpainted. Grey already shows the relief and reads from across the table; the colour pictures are painted 3D renders. If you paint, prime grey and start with a drybrush: the relief does half the work.

Magnets for the minis

Each tile has 2 Ø3×2 mm neodymium magnets in the front, 33.4 mm apart between centres, polarity checked. That's where the stand of our minis clicks on, and it stays there until two fingers lift it off.

Do they fit in the game box?

No. They reach 70 mm and the game box has no room for that. Keep them in a separate box, resting on their bases with paper between them.

Frequently asked questions

Do they replace the game's tiles?

No. They sit on top of your cardboard tile, which stays underneath with its edge showing. No game components are included.

What's the difference between level 1 and level 2?

Size. Level 1: 60×66 mm base, on the game's 60×76 mm tile. Level 2: 72×70 mm base, on the game's 72×81 mm tile. Level 2 tiles are taller too.

How long do they take?

They're printed when you order and leave the workshop in ≤10 working days. Delivery to mainland Spain and the Balearics adds 1 to 3 working days.

What if it arrives broken?

Send us a photo within 7 days of delivery and we reprint it free. We wrap them one by one, but couriers have their own game.

Are they official?

No. They're unofficial, fan-made pieces for games you already own. No game and no game components are included.

Keep looking

Sculpted resin, not PLA; sized in mm to the game's own tiles; already printed, no printer needed; unofficial, fan-made.